Home > Windows 7 > Windows 7 Can't Detect My External Harddrive

Windows 7 Can't Detect My External Harddrive

I have had good luck with free MiniAide Fat32 Formatter, which analyzed my 3TB Hard Drive and allowed me to Partition and Re-Format in Windows 7. Heres how i fixed mine just today after a week of trying everything. I'll cut to the chase - PLUG THE HARD DRIVE IN VIA A PORT ON THE BACK OF THE PC. He's as at home using the Linux terminal as he is digging into the Windows registry. http://internetpasswordpro.com/windows-7/windows-10-won-39-t-detect-monitor.html

The steps below will be the same for both USB flash drives and larger external hard drives, which work similarly. I have an external DVD player that is USB plug and play. I tried numerous other procedures but to no avail. Notwithstanding the above, I still have 3 USB drives working, and I hope they continue to do so, while I backup all the data files on them.

External HDD wouldn't show up but now all is well. If yours is working, could you please tell me how you fixed it? Seagate site says no jumper is needed for this drive.

Look for a disk that matches the size of your flash drive. I have a tiny little Sony flash drive 8 GB and you're instructions are the only one's that worked. Reply Robert July 26, 2016 at 9:35 am Very interesting, but I only got half way as when I R/Click on the drive the menu is Grayed out except for "Properties I followed all above suggestions.

An error (403 Forbidden) has occurred in response to this request. and i used a different usb to check if the port was broken. xx Reply Ian December 27, 2016 at 1:29 pm Hi Sir Chris Hoffman. https://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/windows-7-not-detecting-my-external-hard-drive/87159647-2dda-4680-bd2f-f7c783a8ef4a Reply Brian February 5, 2016 at 2:38 am Sorry, I had a new drive and did not need to worry about data.

Reply Leonar April 15, 2016 at 3:33 am I have the same problem but in my case, my Seagate external hard disk is not even showing in the disk management. It has the windows logo on it. No go. because I've replaced the motherboard with a more healthy one but still second-hand (because of SD RAMs and ...).

Windows recognized the new device and according to its messages, automatically installed the required device drivers. http://www.sevenforums.com/hardware-devices/100817-windows-7-doesnt-recognize-my-external-hard-drive.html If no computers see the drive when you connect it-even in the Disk Management window-the USB drive itself is likely dead. I need the data. Diagnosing the Problem RELATED ARTICLEUnderstanding Hard Drive Partitioning with Disk Management If you connected a USB drive and Windows doesn't show up in the file manager, you should first check the

For example, add the letter G: and the removable drive will be accessible at drive G:. this page Sometimes, it'll also be marked as "Removable", but not always. It looks totally like mine. Restarted computer (without disconnecting HD).

An error (403 Forbidden) has occurred in response to this request. I have tried all of the answers 'jack4rall' had wrote, and thank you for those, but it still does not work for my hard drive. To do this, right-click the partition on the drive in Disk Management and select "Change Drive Letter and Paths". get redirected here The only answer is time and patience.

Use a USB port on the back of your PC. Thank you so much. If you need support for bigger files, then you should use the exFAT format.

The pc could see the drive but said it needed formatting.

On Windows 7, press Windows+R to open the Run dialog, type diskmgmt.msc into it, and press Enter. Reply Garth May 17, 2016 at 3:32 pm I followed the above instructions and was able to format my external hard drive and make it useful again. Here are a few possible solutions based on what you found when searching for the drive in Disk Management. No noise, etc.

Anyone have any ideas? Try this and see if it works. Also, in my case, if I plug in a nano, an icon of a nano shows up on itunes. http://internetpasswordpro.com/windows-7/windows-7-problem-with-windows-live-mail-flashing.html But when I opened up device properties..the device status reads as ' the device is working properly' ..so does that mean the disk is fyn n shd I change the cable..hv

I think that, sometimes, drives attached via USB have to be manually "mounted" in this manner. Any of my older flash drives or Seagate portable HD are recognized and connect to the computer. Reply Mushtaq January 8, 2016 at 5:51 am Hi, did as suggested and worked a treat for me. The time now is 22:57.

I dont want to format it as it contains extremely imp data. In this instance my external hard drive particulars are as follows: Seagate Expansion Desk SCSI Disk Device I have formatted the drive on my Windows 7 PC. Format Drive When it comes to file formats, there are a couple of major formats that are used about 99% of the time: FAT32 and NTFS for Windows and HFS+ (Mac My LG G4 was suddenly not being recognised by my pc, I had to reinstall the driver, windows did it automatically when I followed your instructions.

It also doesn't have the option to change drive letter and paths and/ornew simple volume upon right click.