This post has been flagged and will be reviewed by our staff. Programs running in the background can cause many Windows problems including slowness. 3w. That depends: is it ATX or AT? If Windows still hangs during the shutdown process after you reinstall it, your computer may have faulty hardware or faulty system components including RAM, the CPU, the motherboard or an internal
When I try to shut down or restart my desktop via the standard buttons on the start menu, my computer goes through what appears like the normal shutdown or restart routine, Click Selective Startup, click the Load Startup Group Items check box to clear it, click Apply, click OK, and then click Yes to restart your computer. You can turn off power management as follows: Click [Start]| Settings| Control Panel and open the POWER icon. If it is, your computer may be shutting down properly only to experience traffic on the network that causes it to boot up per your bios configuration settings.
I thought i was going to see an answer as to why the computer was hanging on shutdown, and then a possible solution. After each program is enabled, test Windows shut down. A radio remote is so necessary, it should be considered essential.Well, all that might seem to not actually answer your question, but if you want the Start > Shut Down > Windows seems to have recurring problems with it.
This turns all the power off your computer, but it does take a bit longer than Hibernate and Standby to restart.To change these settings you need to go into:"Control Panel"Category View Flag Permalink This was helpful (0) Collapse - MCE by fkoons / March 21, 2006 4:20 PM PST In reply to: Winning answer to a different question? Check out section 3w for tips on improving system performance and section 9w for tips from selected Websites. BTW: When you start Windows in Safe mode, all shell settings return to their default values.
When you finish running the program you will be prompted to reboot the system. Save Settings on Exit Windows Hangs Sending System Broadcast Message During Shutdown APM Computer with Battery May Stop Responding During Shutdown Steps For Troubleshooting Windows Shutdown Where Did The Enable/Disable Fast Shutdown problems with Windows 98SE - Hangs during Shutdown - ...see Microsoft KB article Q239887 (111). http://windowssecrets.com/forums/showthread.php/88074-Windows98-won-t-shut-down Thanks for your suggestion.
wrote: “Your network connection doesn't allow you to shut down, therefore unloading the driver results in a lockup of the system, or there are other drivers or programs that are hanging Also, do the usual, no corrupt exit sound file, no corrupted .dlls, etc.”StaceyNielson agreed: “It happens when the computer uses Advanced Configuration and Power Interface (ACPI) and the Fast Shutdown feature If you are running screensaver and power management you could have a conflict. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ You should not have power management and a screensaver enabled at the same time; they invariably conflict. But to the problem.
Click the Troubleshooting tab. http://answers.google.com/answers/threadview/id/95308.html Answer:This could happen if you have some wrong driver installed. in Device Manager/System Settings/PCI Bus Properties, set Device Enumeration to BIOS and turn off IRQ steering. (These settings pretend that Win 98 SE is not a PnP operating system.) (8) Clayton In the CONFIG.SYS file, make sure the following lines exist in this order, at the very beginning of the file: DEVICE=C:\WINDOWS\HIMEM.SYS DEVICE=C:\WINDOWS\EMM386.EXE NOEMS X=A000-F7FF DOS=HIGH,UMB If you do not have a
On the Device Manager tab, double-click Computer. Double-click a device type, for example, Sound, Video, and Game Controllers. Running Dell Diagnostics will tell you if hardware is causing the problem. 8w. When you are prompted to restart Windows, select NO. (NOTE: If you disabled a PCI hard disk controller, choose Yes to restart Windows.
To change these options just go to the Control Panel and click on "Power options," then go to the Advanced tab. Thanks to TechRepublic’s Ed Engelking for helping whittle down the list from the nearly 600 solutions we received.Get the update from MicrosoftGeorgeSchleicher recommends getting the Windows 98 Second Edition Shutdown Supplement unckeck the boxes for the lastest installed programs, or uncheck all the boxes. You can apply the patch and then reinstall your NIC and its drivers.
Place a semicolon (;) at the beginning of these lines if they have entries following the equal (=) sign. The first section lists symptoms and refers you to the portion of the second section that deals with your symptoms. Flag Permalink This was helpful (0) Collapse - i'm with olifrench on this one by pigonthewing / March 16, 2006 6:19 PM PST In reply to: Winning answer to a different
FOR WIN95: Restart Windows. Right click on My Computer and select Properties. Click [Start]| Programs| Accessories| System Tools| System Information. 2. Highlight "PCI bus" and click on the Properties button.
WARNING: Do not try this step unless you know what you are doing -- mistakes in this step can result in your computer not working at all! Program Not Responding Sometimes when you try to shut down, a dialog will appear that says "This application is not responding". In my case it was the Zone Alarm firewall application. THIRTEENTH STEP: USE BOOTLOG.TXT TO IDENTIFY THE PROBLEM If Windows still hangs during the shutdown process, create a BOOTLOG.TXT file by restarting the computer, bringing up the Boot Menu and selecting
in the Select a Name For the Shortcut text box and click Finish." You are at the www.techadvice.com site which is not associated with the company or products shown on Troubleshooting Shutdown problems - Microsoft KB article Q238096 (39). IMPORTANT: Record all of the devices you disable in this manner so that you can enable them again later. You may also need an updated video driver.
Perform the following steps to keep the virus scan software from scanning your floppy drive on shutdown: When running McAfee AntiVirus: Right-click the McAfee icon located in the system tray (icons You can also do this with the Occache folder. This time, it worked and the computer shut down properly. =========== HOW TO USE UTILITIES =========== USING MSCONFIG (WIN 98 ONLY) or SYSEDIT (WIN98 or WIN95) Click Start | Run (or, To run scandisk and defrag successfully, be sure that there are no processes running in the background.
SEVENTH STEP: RULE OUT WIN.INI COMMAND LINE PROBLEMS Launch SYSEDIT. Submitted by: Andrew***********************************************************************Answer:Scott,This could be a myriad of things, from a stubborn background process that will not go away, to a case of items shutting down too quickly before the computer