Home > Hard Drive > Setup Did Not Find Any Hard Disk Drives Installed In Your Computer Windows Xp

Setup Did Not Find Any Hard Disk Drives Installed In Your Computer Windows Xp


Morronic This worked, thanks :) Chieftec Hey man, great help because i have the same problem > if i set AHCI on in bios and start up with xp pro cd Reply Rodrigo says: March 15, 2014 at 05:08 I got home from work yesterday afnetroon and mowed the lawn and blew leaves before the rain came today. I have been struggling over the past few days to get a working XP installation done on my seperate SATA hard drive and am SO happy I found this handy little I wish there were a way to test if the .ifo SATA support file I downloaded has been integrated. http://internetpasswordpro.com/hard-drive/how-to-use-two-hard-drives-in-one-computer.html

Changing the registry keys worked like a charm. Anyway, you would need to go to the board manufacturers website for the SATA drivers. You can check your final results by opening a command window and typing, "A:", or open an explorer window and choose the "3-1/2 Floppy (A:)" entry under "My Computer". Okay, I know why -- but for the purposes of our discussion, the text mode driver is the one you really need. https://www.cnet.com/forums/discussions/mixing-sata-and-ide-drives-in-a-system-115142/

Setup Did Not Find Any Hard Disk Drives Installed In Your Computer Windows Xp

Leonardo de Azevedo Obrigado….Agradecemos tambem a Deus pelo criador deste tutorial para que possamos desfrutar deles. Report 91-bluebird- Feb 9, 2010 at 10:21 PM I have the same error, on my gateway mx6214, bios shows harddrive but xp doesnt see it, ubuntu does however, I need xp Thanks. The setup is now detecting the Hard Drive!!!

i was in the same problem but finding this usefull post hope i solved my problem going to try tomorrow. Thanks god for geeks 😀 Reply Tom says: January 13, 2011 at 07:41 Worked great for me. Any suggestions? Hard Drive Not Detected While Installing Windows 7 Or is there any way to get Win 7-64 to boot without changing the bios from IDE?

As long as your mobo supports both IDE and SATA and still has a connection for each, then you're fine. freddyzdead Thank you for the ONLY sensible advice I've found in 3 hours of googling. For some reason the primary drive does not boot to the usual XP screen and all I get is a blinking cursor in the top left hand portion of the screen. R R Nathan Hi friend, I should say "TOO GOOD".

how can i solve problem? Windows Xp Install Not Detecting Hard Drive If you're not already familiar with forums, watch our Welcome Guide to get started. Followed solution 1 and seemed to do the trick - thanks! TQVM.

Windows Xp Install Can't Find Hard Drive

i searched everywhere and your solution was just so simple!! get redirected here I also read some about the crashing of WD Green Drives but that was all I could afford at the time. Setup Did Not Find Any Hard Disk Drives Installed In Your Computer Windows Xp When I go to install the disc it takes me through the whole installing process 1. Setup Did Not Find Any Hard Disk Drives Installed In Your Computer Server 2003 After boot windows xp/operating system on HD SATA, i re-activate IDE HDs and after backup data, repartitioned like i want. 5.

Cool. navigate to this website We've got a conversation going now. Power on and press F2 to enter in BIOS stetup Utility. 2. Reply nhikol says: August 25, 2010 at 04:57 I have the same problem after using DBAN. Setup Did Not Find Any Hard Disk Drives Windows 7

I went to Acer's website and found the drivers for XP but I don't which is the SATA driver. That way it will recognize your Sata drives and install Windows on the drive you select to be the boot drive.I would advise disabling IDE Hard Drives by temporarily removing their Reply Rosco says: October 26, 2010 at 18:12 Hi Ktt, What's your make/model of laptop? More about the author Worked like a champ.

Anyone got a clue what's up? How To Connect Ide Hard Drive To Sata Motherboard Once it completes the copy process, press the "Next >>" button and then skip the pre-install options screen by pressing it again. Ron Thanks for posting the explanation concerning BIOS Sata settings.

Byhl says: December 8, 2009 at 8:41 pm Hello John!

I never had this problem before. A final message is added to the list, "Formatted the current image." This is all a bit pedantic, I know, but it gives you the most flexibility at the expense of I popped the new drive into a spare bay, plugged in the SATA cable and the power connector, and booted up the Windows XP installation CD. Sata And Ide Hard Drives Together Please guide me.

after a few days of having my mom use my laptop, it just doesn't start up and when i did a diagnostic on the hard disk, it says it doesn't exist? I know it's in The BIOS settings ; and that it is possible . I didn't Google your board. http://internetpasswordpro.com/hard-drive/we-couldn-39-t-find-any-drives-windows-10.html Reply Benny says: August 3, 2010 at 09:33 Hello, Thank you very much for the answer.

At this stage it is more advisable to try to download the correct drivers from the manufacturers website and either create a Windows XP CD with those drivers on it as I need this computer being I'm starting college at the end of this semester, and I don't have the money for a new one right now. Report wac- Jul 28, 2010 at 10:06 PM Thanks, been playing with this all day, I'm happy and my baby girl will soon be happy Report ee- Aug 4, 2010 at Back to my story: The installation CD whirred and hummed for a minute loading various device drivers in preparation for installing Windows.

Restart and install XP Operating System. Chris HP 6710s Go into bios settings and change sata hard drive setting from normal and it finds hard drive danm what a relief… crupp Thanks so much for this article! Tim Harpe says: January 18, 2012 at 10:44 pm Answer me this I have an MSI K8T NEO V, which driver did you or do you use…I think its the 8237 Don't activate Windows yet.

My BIOS was reset because my computer had no power for a couple of weeks, and with BIOS reset to IDE I couldn't find my RAID disks. i am unable to find my sata configaration section. Please help. I applied it on a Akalay laptop with Intel Core 2 Duo with 250 GB WDC WD2500BEVS-22UST SATA drive and Vista OS.

That way I'll stil have the same speed for now but much more room until I can get the Black WDs. Tech Journey Follow @TechJourneyNet Subscribe to Blog via Email Enter your email address to subscribe to this blog and receive notifications of new posts by email. R. Ok, my problem is, when i startup the pc…there comes the black screen saying cannot find secondary drive, and ask me to hit f5 to retry in order to start the

Flag Permalink This was helpful (0) Collapse - It's fine by ackmondual / July 22, 2005 11:48 AM PDT In reply to: Mixing SATA and IDE drives in a system? As I said, do some more research on the drives, and hang out here, maybe you'll get some more ideas. In Boot Set up no option to select IDE only AHCI, ATA and Legacy. A friend had me installed XP Pro to her new Acer laptop and I figured to slipstream XP SP1 installation CD with SATA drivers plus SP2.

Bruce says: That's what I did, bought an entirely new computer (with 16 Gb… lbartosek says: Hi, works great with the default post_tag, however, I use an additional… TagsApache HTTP Server